HSV10-23-01 High Pressure Solenoid valve
English Chinese (Simplified)

comatrol hydraulic cartridge valves


Solenoid Valve, Spool Type, 2-Position, 3-Way, Normally Closed, Pull-Type.  When de-energized, the HSV10-23-01 allows flow from port 1 to port 2, while port 3 is blocked.  When energized, flow is allowed from port 3 to port 1, while port 2 is blocked.  Follow the "Operating Envelope" limits to ensure shifting of the valve during operation.  This valve comes standard with a one-direction, push-pin manual override.





These spool-type valves are commonly used in a selector circuit, or as an on/off pilot control for a directional spool valve. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input. Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve.




Rated Presssure* 350 bar [5075 psi]*
Rated flow at 7 bar
[100 psi]
30 l/min
[8 US gal/min]
Weight 0.57 kg [1.26 lb]
Cavity SDC10-3
Standard Coil H16 29 Watt
*Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).



Performance Curves






Example Circuits



Ordering Information

Product Documents and Downloads
Download this file (HSV10-23-01 Catalog Page.pdf)HSV10-23-01 Catalog Page.pdf310 kB05-14-2015
© Comatrol 2014   Facebook      Twitter     linkedin Linked-In     youtube YouTube  Privacy Policy    Disclaimer