SVP10-NC Solenoid Valve
English Chinese (Simplified)

comatrol hydraulic cartridge valves


This is a normally-closed, pilot-operated, poppet-style 10-size solenoid valve. When de-energized, the SVP10-NC acts as a check valve allowing flow from port 1 to port 2, and blocking flow from port 2 to port 1 . When energized, the valve’s poppet is shifted and allows flow from port 2 to port 1, and severely restricts from port 1 to port 2. This valve is available with an optional pull-type manual override.



The SVP10-NC is designed to function as load holding or blocking valve in applications where low internal leakage is required. In load holding applications, the circuit should be designed so that the de-energized state is the position that is holding the load. This valve can operate at an inlet pressure of 315 bar on port 2 for 250,000 cycles.







Rated Presssure

230 bar [3300 psi] 

Rated flow at 7 bar
[100 psi]
80 l/min
[21 US gal/min]

6 drops/min @

Rated pressure

Weight 0.43 kg [0.95 lb]
Cavity SDC10-2
Standard Coil M16 26 Watt
Robust Coil

R16 20 Watt

Robust nut P/N 173804910

(no coil O-rings needed)


* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.



Performance Curve






Example Circuit



Ordering Information

Product Documents and Downloads
Download this file (SVP10-NC - 3D STP - 3D STP Files.zip32 kB01-16-2014
Download this file (SVP10-NC Catalog Page.pdf)SVP10-NC Catalog Page.pdf608 kB05-14-2015

© Comatrol 2018 | All rights reserved

  Facebook      Twitter     linkedin Linked-In     youtube YouTube  Privacy Policy    Term of Use


Danfoss Power Solutions S.r.l. IT07874070019